Important information about purchasing from the US.
RØDE Microphones highly recommend that you only purchase RØDE products from authorised dealers. You can view a full list of authorized US dealers here.
If you purchase any RØDE microphone from an unauthorized dealer you will not receive any US warranty or technical support. You can view a full list of unauthorized US dealers here.
Le RØDE Lavalier est un micro cravate discret, de qualité broadcast, pour toutes les applications imaginables. Le faible bruit propre du Lavalier, sa directivité omnidirectionnelle et sa discrétion en font une solution idéale pour le cinéma, la télévision, la vidéo, le théâtre, les lieux de culte et toutes les autres situations où un micro de qualité doit être entendu sans être vu. Il est connecté par un câble blindé en Kevlar® de 1,2m, pouvant résister à des tractions allant jusqu’à 10kg. La mini-fourrure incluse offre une protection contre le vent fort et garantit de bons résultats dans des environnements hostiles tandis que les pinces pour câble fournies permettent d’acheminer le câble discrètement tout en offrant une mobilité maximale à l’utilisateur. L’étui étanche antichoc assure la protection du micro, du câble, des pinces et des accessoires fournis. Pour offrir la plus grande flexibilité possible, RØDE a conçu le système de connecteurs MiCon™ permettant de brancher le micro Lavalier à de nombreux systèmes sans fil, consoles de mixage, caméras et enregistreurs de terrain. Le micro cravate RØDE Lavalier est fabriqué en Australie et couvert par une garantie RØDE Microphones de 5 ans comprenant une garantie complète de 12 mois, suivie d’une garantie optionnelle de remplacement de micro de US$99 durant la période d’extension.
Principe acoustique | Permanently Polarized |
Electronique active | JFET impedance converter |
Capsule | 0.10" |
Captation | End |
Bande passante | 60Hz - 18kHz |
Impédance de sortie | 3000Ω |
Niveau max. de pression sonore (SPL) | 110dB (@1kHz, 1% de distorsion harmonique sous 1kΩ) |
Niveau de sortie maximum | 189.0mV (@1kHz, 1% de distorsion harmonique sous 1kΩ) (@ 1kHz, 1% THD into 1KΩ load) |
Sensibilité | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Niveau de bruit équivalent (pondération A) | 25dBA |
Niveau de bruit équivalent (pondération A) | 1.00g |
Niveau de bruit équivalent (pondération A) | 12.00mmH x 4.50mmW x 4.50mmD |
Garantie | 1 an avec extension gratuite de la garantie à 5 ans après enregistrement ici |
The new RØDE Lavalier has a full bodied low end and a natural high end response. This means you can do a better match with a boom mic in post. The sound produced is lovely, and matches my other quality lavs well. While testing, myself and another sound recordist were hard put to hear any difference with my standard units retailing at twice the price of the RØDE!
I also love the ability to interchange the capsule/lead/ adaptor with the MiCon system. That means greater flexibility.
So, how does the RØDE lavalier compare to some of the tried and true lavs on the market? You would really need "golden ears" to hear the nuances. We've had professionals in blind tests pick the RØDE lav against mics costing much more.
The first thing I noticed was the lightness and thinness of this mic. Despite being so small, the Kevlar material is very, very strong. The included waterproof case is a bonus! With everything I record, the ability to use short and long extension cables is crucial.
When we record a small car (in motion) at 12 feet plus in length or a large battle tank (in motion) at over 32 feet long , we can place the lavaliers from the engine and exhaust areas to where I sit inside the vehicle using multiple RØDE extension cables. Unlike standard thick XLR cables, I can run these thin RØDE extensions without having to use so much gaffers tape to secure them on fast moving vehicles. The small screw-on couplers to secure cables together works quite well so the idea of lightness and thinness is still maintained.
Si vous avez des questions ou un problème concernant le Lavalier, rendez-vous à notre page de contact pour localiser ou contacter votre distributeur local