Important information about purchasing from the US.
If you see a price that looks too good to be true, it probably is! Beware of counterfeit goods. Check our website to make sure you’re purchasing from an authorized RØDE reseller. For quick reference NO FBA reseller (FULFILLMENT BY AMAZON) on Amazon is authorized. You can view a current list of unauthorized US dealers here.
29 Revendeurs en ligne vendant le VideoMic NTG
Revendeurs en ligne vendant le VideoMic NTG
Le VideoMic NTG est un microphone canon complet de qualité professionnelle optimisé pour une utilisation sur un appareil photo. Il dispose de la même conception acoustique révolutionnaire que le microphone canon NTG5 qui offre une transparence inégalée et un son naturel et pur. Ajouté à une réponse en fréquence incroyablement plate, un diagramme de directivité super cardioïde hautement directionnel, et un bruit propre très bas, vous obtiendrez un microphone pour appareil photo qui rivalise avec les meilleurs microphones canon au monde.
En plus d'avoir un son exceptionnel, le VideoMic NTG est extrêmement polyvalent grâce à son éventail d'outils et de fonctionnalités qui vous aideront à surmonter tous vos défis d'enregistrement. Un commutateur numérique vous donne accès à un filtre passe-haut, un pad -20dB, un booster de hautes fréquences, et un mode safety channel, ainsi qu'une commande gain variable à l'infini qui vous permet d'ajuster précisément la sortie selon vos besoins. Sa sortie 3,5 mm détecte automatiquement à quel appareil vous êtes connecté (appareil photo ou mobile) pour s'y adapter : vous n'aurez plus besoin de vous embêter avec des adaptateurs de câbles ! Il dispose également d'un nouveau témoin lumineux de crête de dB afin de vous assurer que votre son n'ait jamais de distorsion.
Le VideoMic NTG est bien plus qu'un microphone d'appareil photo. En plus de s'associer parfaitement avec les appareils photo compact et les smartphones – qu'il soit sur l'appareil, sur une perche ou un canon – c'est également un microphone USB complet qui peut être branché à un ordinateur, une tablette ou un smartphone. En plus de cela, le jack 3,5 mm fonctionne également comme sortie de casque audio pour un monitoring facile de votre son tout en utilisant la sortie USB.
Pressure gradient electret condenser
20Hz – 20kHz
35Hz – 18kHz ±3 dB
|Signal to noise Ratio|
105dB SPL (A-weighted, as per IEC651)
15dB SPL (A-weighted, as per IEC651)
-26 dB re 1V/Pa (50mV @ 94dB SPL) ± 1dB @ 1kHz
|Input SPL @ 1% THD|
|High Pass Filter Frequency|
3.5mm auto-sensing USB-C
Mac OS 10.12
The auto-power feature was first introduced to the VideoMic range with the VideoMic Pro+. It is a handy function that automatically turns the microphone off when it detects that the camera is switched off, helping conserve battery life, and turns it on when the camera is turned on, so that you never have to worry about missing a take. The auto-power function only works if your camera delivers plug-in power (most do), as this is what tells the microphone if it is on or off, or if you are using the microphone in USB audio mode. The VideoMic NTG also features a power button, so that it can be manually powered on and off. Check out our list of cameras that deliver plug-in power here.
The auto-sensing output is an intelligent feature that seamlessly detects whether your microphone is plugged into a TRS input, like those on most cameras, or a TRRS input, which most smartphones and tablets have, and switches the output to accommodate. This means you don’t have to worry about using TRS to TRRS adaptor cables – the SC10 cable that accompanies the VideoMic NTG will work seamlessly with any device. However, if your device has a Lightning® connector or anything other than a 3.5mm input, you will need to use an adaptor.
The infinitely variable gain control is a knob on the rear of the microphone that allows you to precisely tailor the output level to your recording device. This is an active control that has a greater output range than any other microphone on the market – it can deliver anything from mic level signal all the way to a headphone level output, which is particularly useful when using the 3.5mm jack as a headphone output. Where other microphones simply employ a pad to adjust the output, the VideoMic NTG’s control also actively amplifies the signal at various gain stages, resulting in a cleaner audio with a vastly improved signal-to-noise ratio (it essentially does all the hard work so your camera’s lower-quality internal preamp doesn’t have to, lowering the noise floor of your signal).
2 hours from empty to full.
When connected to a camera or smartphone, we recommend you turn down the gain of your camera to, or close to, its lowest setting, and turn off any automatic gain controls that may be activated. Then, starting from the lowest setting, turn up the infinitely variable gain control on the VideoMic NTG until your meters are showing a good level (usually just starting to touch the yellow, or about halfway) when recording your expected sound source. Where possible, monitor your audio using headphones, to ensure your sound is clean and clear.
There are three physical controls on the VideoMic-NTG:
The VideoMic NTG has extremely low self-noise for a microphone of this type (15dBA). All the RØDE VideoMics have extremely low self-noise; in fact, the VideoMic Pro and VideoMic Pro+ are actually slightly quieter than the VideoMic NTG. It’s worth comparing the VideoMic NTG to other on-camera microphones for reference as to how quiet all RØDE microphones are.
Yes, this is the same for the VideoMic NTG. We’ve designed the output level to be similar to the VideoMic Pro+ when the gain knob is set to 10. This is the best place to start with any device, and adjust the level up or down from there. With any VideoMic, the best results are generally achieved when the camera preamp is being driven as little as possible.
There isn’t a standby mode on the VideoMic NTG, it’s either off and not drawing any power, or it’s completely on. When the microphone is off it will last months without the need to charge.
There is no difference in the sonic characteristics of the safety channel, it is just 20dB lower than the main channel. However, when you boost the safety channel in post-production, you may notice some preamp noise from your camera, which may affect the perceived audio quality. The safety channel should ideally be used to replace the small piece of audio that has clipped, and it’s best to blend the audio in and out quickly to reduce any noticeable quality change.
All RØDE microphones are tested extensively for interference from a wide range of devices. We make sure that the bodies are extremely well shielded and that the electronics aren’t susceptible to interference. Our state of the art RF test facilities allow us to put microphones through a wide range of RF simulations, which ensures our designs are robust and highly resistant to RF interference.
The internal battery is not user-replaceable, however, the VideoMic NTG has a 10-year warranty once it has been registered. If there are any issues with the battery within this time frame, simply contact the RØDE support team and we'll happily help out.
To connect your VideoMic NTG to a Lightning-equipped iOS devices, such as an iPhone, iPad or iPod, you need to use the RØDE SC15 cable. Use this to connect the USB-C output of the microphone to the input of your device (please ensure you've updated your VideoMic NTG to the latest firmware to allow for this connection – you can download this here). You can also plug your VideoMic NTG into an iOS device using the 3.5mm output, however, using the USB-C output with the SC15 gives you access to a host of features including headphone monitoring, the safety channel, and two-way audio transmission for making video calls. We highly recommend this option.
The VideoMic NTG's safety channel should work if the VideoMic NTG is connected using the USB-C output of the microphone to the digital input of your device. Please note, this compatibility depends on your smartphone manufacturer. However, it does not function with devices with a TRRS input as they only support one channel of audio.
The VideoMic NTG is a class-compliant device and will work directly with your computer or tablet PC. As a class-compliant USB device, you don’t need drivers or software for it to work. Simply plug it into your device, set it as your input source in your system preferences or recording software settings, and hit record.
The VideoMic NTG is compatible with most Android smartphones that have USB-C. Compatibility depends on your smartphone manufacturer.